These documents are in Adobe® Portable Document Format (PDF) and require a copy of Adobe Reader® to view them. If you do not have a copy of Adobe Reader, you can download and install a free copy from Adobe.
November–December 1995
UK CAA Cites Inadequately Defined Inspection Procedures for Human Errors
in Aircraft Inspection 28 pages. [PDF 140K]
To determine which human factors influence aircraft-inspection reliability, the U.K. Civil Aviation Authority (CAA) evaluated the performances of qualified inspectors working for six days under
controlled environmental conditions. The study was conducted as part of the joint U.S. Federal Aviation Administration (FAA)/CAA Aging Aircraft Inspection Program.
September–October 1995
One Cure for Workplace Safety Complacency: Safety Checklists 24 pages. [PDF 67K]
In the United States, the U.S. Occupational Safety and Health Administration (OSHA) is the government agency that promulgates workplace safety regulations and provides over-sight to ensure compliance. Its publication OSHA Handbook for Small Businesses includes some of the strictest and most detailed workplace-safety checklists. Many of the items found in these checklists apply to aviation maintenance facilities anywhere in the world.
July–August 1995
Repair of Aircraft Windows Is Often Practical and Cost-effective 20 pages. [PDF 193K]
A typical repair costs 50 percent to 80 percent less than replacement. And nearly half of all damaged cockpit windows can be repaired to a “like-new” condition. Relamination and other
repairs are feasible for transparencies used in most pressurized-cabin aircraft.
May–June 1995
Infrared Thermography Offers New Possibilities for Nondestructive Testing 20 pages. [PDF 123K]
More precise temperature-measurement devices have provided the aircraft technician with enhanced tools to perform diagnostic tests on static systems and operating equipment. Infrared (IR) thermographic devices are extremely accurate and easy to use. Rather than using a thermo-couple, or temperature-sensitive liquid as in the common thermometer, IR temperature measurement does not
require physical contact to provide accurate measurements.
March–April 1995
Boeing 747 Landing Accident Reveals Flawed Maintenance Procedures 20 pages. [PDF 104K]
On March 1, 1994, a Northwest Airlines Boeing 747 arriving at New Tokyo International Airport, Narita, Japan, suffered a serious accident on roll-out after landing. The flight, touchdown and initial roll-out were routine. Reverse thrust was selected on all four engines, but when the flight crew moved the engine power levers out of reverse at about 90 knots, the No. 1 engine and pylon sagged, rotating about the midspar pylon-to-wing fittings, allowing the lower forward part of the nose cowl to contact the runway. The aircraft was stopped on a taxiway, with the front of the No. 1 engine contacting the ground. A large portion of the lower forward engine nose cowl had been ground away as it was dragged on the runway.
January–February 1995
Overhaulers’ Tips for Taking the Mystery Out of Aircraft Engine Break-in 20 pages. [PDF 91K]
Aircraft owners, pilots and overhaulers take a collective deep breath as they approach one of the most critical points of an engine’s life — break-in. A new engine or freshly overhauled engine is an expensive investment, with the first few hours of engine operation determining how well it will operate until TBO (time before overhaul). Improper break-in can lead to cylinder problems or even a costly engine failure which could contribute to an incident or accident.